AUTOMATION AND CONTROL OF MICROSCOPES.

DELTAPIX microscope automation, staging and control

DeltaPix provides solutions for automating microscopes of all types and brands, such as motorized focus and XY control. With DeltaPix software solutions, you can scan, time sequence up to 100 positions, loop image, and more of all types and sizes of objects and samples with increased focus and microscopic detail, resulting in images of stunning quality and unique detail. . Contact Zeppelin Metrology to get a quote for a complete solution that exactly fits your automation or digitization application.

DeltaPix motorization modules let you add automation and control for XY, focus, and zoom motors. Motorization modules can be combined with other software modules to allow the user to perform automated tasks such as extended focus imaging with up to 250 focus positions, 3D surveying of a sample surface, scanning, time-lapse recording up to 100 positions, in a loop. image acquisition and much more.

DELTAPIX automation products

DPX STEP4

XYZ STAGE CONTROLLER

DeltaPix USB controller with 4 outputs for motorized XYZ and ZOOM steps.

Minimum CPU System Requirements – Intel I5 (Quad Core)
RAM – 4GB
Disk space – 15 GB
Operating System – Windows 8, Windows 10 and Windows 11 64-bit version
Monitor – Full HD (1920 x 1080)

ERGOFOCUS

ERGONOMIC FOCUS MOTOR CONTROLLER

This exclusive focus controller from DeltaPix offers a high-quality, ergonomic solution for automated microscope focusing.

The ErgoFocus design is based on feedback from end users and physiotherapists to achieve the best possible working ergonomics. The ErgoFocus has a very compact design measuring just 134 x 135 x 80 mm and takes up little space.

The ErgoFocus features USB connections, increasing its versatility, and two ultra-precise focus encoders that give the user the option of using the controller with either their right or left hand. The controller also has an OLED display that offers an accurate position readout.

ZEISS MICROSCOPE AUTOMATION

DeltaPix products interface directly with all Zeiss microscopes via the Zeiss MTB server. This allows control of the XY and Z axes, filters, shutters and reading magnification settings and other variables.

Control via the MTB server can be combined with direct control from stages such as Prior or Siskiyou.

MICROSCOPIC FOCUSING AUTOMATION

A simple and easy solution to convert an old microscope into a 3D microscope.
DeltaPix provides solutions for automating microscopes of all types, such as motorized focus and motorized XY axis. With DeltaPix automation solutions, you can convert most old microscopes into a modern 3D microscope.

Capture extended focus images with up to 250 slices with ease, create 3D topography of the sample surface, and enable roughness measurement. With the automation solution. DeltaPix, no need for a new microscope, reuse the old microscope and get the same results as a new 3D microscope.

Save the environment by reusing your old microscope with a DeltaPix automation upgrade. The focus motor can be controlled by the DeltaPix ErgoFocus.

MICROSCOPE FOCUSING MOTOR

Simple, easy-to-install Z solutions for most microscopes. Motorized focus control provides step sizes as small as 0.002 µm, providing excellent resolution for accurate and repeatable Z-axis focusing. This focus motor can be mounted on most microscopes as long as there is a fine focus knob on the microscope.

For large movements when speed is required, the focus motor can be driven at speeds of up to 20 rotations per second. An optional probe encoder provides the highest accuracy and repeatability available. The inverter has a rotating cable system,

Designed to prevent the cable from twisting around the unit. The focus motor can be controlled by the DeltaPix ErgoFocus.

XY MOTORIZED MICROSCOPE STAGE

DeltaPix can provide solutions for most microscope types and brands and integrate with well-known XY stage brands and manufacturers such as Prior, Marzhhauser and Ludl.

Prior’s ES111 OptiScan stage is designed for upright microscopes and offers the ideal compromise between price and performance.

The ES111 is designed to use Prior’s ProScan range of sample holders. This allows you to examine the widest variety of sample types, including glass slides, multiwell plates, Petri dishes, and polished metallurgical samples.